OPERATION AND FUNCTIONS
Pause
Press the PLAY/PAUSE button once more to stop playback.
The counter on the left side of the display will start to blink.
To continue playback, press the PLAY/PAUSE button again.
The counter on the left side of the display will stop blinking
and playback will continue.
Stop/Clear
To stop playback completely, press the STOP button once.
The display will again display the number of tracks on the disc
and the total playback time.
When the STOP button is pressed all previous programming
settings will be deleted.
Previous and next
When a CD track is being played it is possible to switch to the
previous track or to the next track.
If you want to continue to the next track, you must press the
>>I (next) button on the remote control or on the front panel
once. If you want to move on several tracks, you must press
>>I until you reach the track desired.
If you wish to go back to one of the previous tracks, you must
use the same procedure but not the same button. Use the I<<
(Previous) button instead.
15
CD 20-005-04:26
CD 20-006-00:01
CD 10-005-04:26
CD 10-001-40:26
To Next Page
Loading...
Need help?
General
