Tangent CDP-200 User Manual

REMOTE CONTROL
Installation of batteries
1 Remove the cover as illustrated.
2 Position two batteries of the type AAA/R03/UM4 in the
battery compartment. Make sure that the orientation of the
batteries is correct (see drawing at bottom).
3 Replace the cover.
- Do not mix new and old batteries and do not use different types of batteries.
- If the remote control is not used for prolonged periods, remove the batteries from the remote control to avoid corrosion.
Using the remote control
Direct the remote control at the sensor on the front panel of
the unit. When the remote control signal is received, the unit
reacts accordingly. The remote control works within a range of
6 metres.
- Sometimes the remote control does not work well in strong light. You may have to move the unit if it is a problem.
- Malfunction may occur if other remote controls are used near the unit.
- Do not place any objects on the remote control, as the batteries may become flat if a key is depressed constantly.
- Make sure that there are no obstacles between remote control and unit.
- Do not position the unit behind tinted glass as it may reduce the maximum range of the remote control.
09
POWER
HIFI-200
VOLUME
0
1
2
34
5
6
78
9 10+
TUNINGTUNING
STATION
CD
TUNER
AUX1
AUX2
DVD
AUX3
PHONO
TMODE
AUTOTUNE
MUTETITLE
SETUP MENUAUDIO
SUBTITLE
STATION
ENTER
ST/MO MEMORY
DISPLAY
SLOWRANDOMREPEAT
STANDBY/ ON
DIGITALAUDIO
CDP-200 CD-PLAYER
REWIND FORWARD

Tangent CDP-200 Specifications

General

Brand	Tangent
Model	CDP-200
Category	CD Player
Language	English