Tangent Dab2go+ User Manual

No.
Description
Functions
1
2.4” TFT Screen
Display
2
Buttons
Basic control of operation
3
Control Knobs
ON/OFF, Volume Control and TUNING/SELECT
Control
4
F-connector Antenna
Reception of DAB/FM signal
5
Battery compartment
Storing rechargeable battery
6
AUX In
3.5mm socket for AUX IN
7
Earphone out
3.5mm socket for earphones connection
8
DC IN
Power supply
9
On/Off button
Switch power on/off
10
LED light
Indicate battery charging status
Getting Started
The packaging contains the following items:
DAB/DAB+/FM Radio with Bluetooth
Power adaptor
3.5mm audio cable
F-connector antenna (Installed on the device)
User Manual
• Connect the DC cable of the power adaptor to the DC IN socket at the back of the device
and plug the power adaptor to the mains socket. Slide the ON/OFF button to "ON" to
switch on the device and the Dab2go+ logo will appear on the screen.
• The time, date and any active alarm icon are then displayed on the screen. The time and
date are also updated automatically from DAB by default. If time and date are set
manually, auto update will then be disabled. Press and hold STANDBY button to turn the
device to standby mode.
Note : If the device is not operated with AC-DC adapter and the battery power is fully
empty without recharging, the current time and date of the device will not be kept and
eventually return to default date/time as 01/01/2015 and 0:00

Tangent Dab2go+ Specifications

General

Brand	Tangent
Model	Dab2go+
Category	Radio
Language	English