FRONT PANEL DESCRIPTION
CH1 ACOUSTIC
1. INPUT: Input jack for acoustic guitar (6.35mm)
2. HIGH/LOW: Input select control for acoustic guitar. Select "HIGH" when
connecting guitar of low output.
3. CLIP: CH1 indicator for overdrive of pre-amp signal.
4. CONTOUR: Brightness control, increasing brightness of acoustic guitar.
5. CONTOUR INDICATOR.
6. GAIN: CH1 gain control. When indicator of Clip overdrive is on, turn down
the GAIN to prevent distortion.
7. BASS: Boost/cut +/- 10dB of low frequency.
8. MIDDLE: Boost/cut +/- 10dB of middle frequency.
9. TREBLE: Boost/cut +/- 10dB of high frequency.
CH2 MIC
10. INPUT: Input jack for MIC (6.35mm)
11. LINE/MIC: Select button for LINE/MIC input.
12. CLIP: CH2 indicator for overdrive of pre-amp signal.
13. GAIN: CH2 gain control. When indicator of Clip overdrive is on, turn down
the GAIN to prevent distortion.
14. BASS: Boost/cut +/- 10dB of low frequency.
15. TREBLE: Boost/cut +/- 10dB of high frequency.
EFFECT CH
16. EFF.PAN: Assign effect level to a specific channel.
17. MODE: Effect select control (Hall, Plate, Chorus, Delay).
18. LEVEL: Effect level output control.
19. MASTER: Master volume control.
20. POWER INDICATOR.
INPUT
GAIN
BASS
MIDDLE TREBLE
INPUT
BALANCED
GAIN
BASS
TREBLE
EFF.PAN MODE LEVEL
MASTER
LOW
HIGH
CLIP
CONTOUR
MIC
LINE
CLIP
POWER
CHI ACOUSTIC
CH2 LINE/MIC
CH2 CH1
1
2
3
4
EFFECTS
1.HALL
2.PLATE
3.CHORUS
4.DELAY
3
2
5
8
10
4
1
6 7 9
11
12
13 14 15
16
17 18 19
20
To Next Page
Loading...