Allspeeds Document - User Service & Maintenance Manual Tangye Hydralite Jacks Page 4 of 32
Rev 1. Issue 1. Date: 04/12/2023
1 Scope
This manual covers the maintenance and servicing of the Hydralite range of Tangye hydraulic
lifting jacks.
The Hydralite range are lightweight, moveable jacks designed to lift heavy loads with low
effort and maximum safety. These jacks are not designed to be moved whilst under load.
These jacks are designed in accordance with BS EN 1494:2000 +A1 2008 – the British
Standard for “Mobile or moveable jacks and associated lifting equipment”
Please read carefully and work in accordance with this instruction booklet and keep in a safe
place for future reference.
It is the responsibility of the purchaser to ensure that operators are properly trained in the
safe use of this equipment and have access to this document.
No modification and/or additions may be made to this equipment without the written
permission of the manufacturer.
It is expected that the product is serviced by competent technical personnel who have been
properly trained to maintain and repair hydraulic lifting equipment.
2 Technical Data
2.1 Jack Weights
Important: Ensure the correct Manual Handling procedures are carried out when handling
the jacks. Where a jack has a claw attachment, the claw should be removed from the jack
and lifted separately.
Table 1: Jack Weights
To Next Page
