Allspeeds Document - User Service & Maintenance Manual Tangye Hydralite Jacks Page 5 of 32
Rev 1. Issue 1. Date: 04/12/2023
The weight of the jack is also marked on the nameplate affixed to the jack base. All jacks
have lifting handles and these should be used during transportation. Larger jacks may need
to be moved by two people.
2.2 Oil Requirements
The Hydralite range of hydraulic jacks contain nitrile seals and should only be used with good
quality hydraulic oil (e.g. Shell Tellus 32). For compatibility with any other fluid, please
contact the manufacturer.
2.3 Environmental Considerations
The jack is intended for use in industrial environments, inside or outside, between
temperatures of –20 to +50°C. The jack should not be used outside these limits or in
explosive atmospheres/areas of nuclear radiation.
2.4 Noise and Vibration
By its design, the jack operates slowly under manual effort. There is no noticeable noise or
vibration. The noise level does not exceed 70 dB(A).
3 General Safety Rules
3.1 Warnings
These warnings are provided to improve safety and should be carefully read before using
or maintaining the equipment.
3.2 Important Information
It is vital that these instructions are available to the equipment users. It is also important
that they are retained with the equipment if it is sold or transferred to another user.
Allspeeds Ltd will not be held responsible for any damage to the equipment or personal
injury resulting from unsafe use of the product, lack of maintenance or incorrect operation.
3.3 General Safety
To prevent the risk of injury, the jack should only be used by fully trained and competent
operators.
• Make sure that all safety devices are in place and functioning correctly.
• Make sure the working area is adequately lit and is free of any obstructions.
• Only operate the jack in a safe working environment and not during poor weather
conditions. (Do not operate during rain/lightning/excessive heat etc.)
• The jack should not be used for the lifting of persons.
Recommended PPE for operation and maintenance includes safety shoes, safety glasses and
gloves.
To Next Page
