Do you have a question about the Tanita Inner Scan Body Composition Monitor BC-536 and is the answer not in the manual?
Important safety notes regarding medical implants, slippery surfaces, and data loss due to improper use or power surges.
Instructions on opening the battery cover and inserting AA-batteries correctly, noting polarity and storage advice.
Guidelines for maintaining the unit's condition, including avoiding disassembly, impact, extreme environments, and water.
Instructions on how to activate the unit by pressing the Set button and what to expect on the display.
Guide to selecting a personal key number using Up/Down buttons and confirming with the Set button.
Instructions on setting the user's age using the Up/Down buttons and confirming with the Set button.
Guide to selecting gender (Female or Male) using Up/Down buttons and confirming with the Set button.
Instructions on specifying user height in feet/inches or centimeters using buttons and confirming.
Steps to select a programmed personal key and step onto the platform to initiate measurement.
Explanation of how weight, Body Fat percentage, and Body Fat Range are displayed and interpreted.
Instructions on using the Weight-Only key to perform a measurement without body composition data.
Guidance for addressing issues where an incorrect weight unit (kg, lb, st-lb) is displayed.
Explanation of the 'Lo' message indicating low batteries and the need for immediate replacement.
Troubleshooting steps for 'Error' messages, including movement, foot placement, and body fat percentage limits.
Explanation for the 'OL' message, indicating that the weight capacity has been exceeded.