Preset # Display Name
1 thru 15 Empty or User Preset Presets 1 - 15 are "empty" until you choose to store a custom preset; after which it will display "User Preset #"
Preset Level (dB)
Factory Presets Typical applications L C R Ls Rs SUB LFE Bass M. X X-Curve 1 X-Curve 2
-over
16 Neutral All parameters neutral - a good starting point 0 0 0 0 0 0 0dB Gain Off Off Off
17 BassMgt. 50Hz Music, video and post for domestic (Not Cinema) use - 0 0 0 0 0 0 0dB Gain 50Hz Off Off
Stereo, 5.1, 5.3 and 6.1
18 BassMgt. 80Hz Music, video and post for domestic (Not Cinema) use - 0 0 0 0 0 0 0dB Gain 80Hz Off Off
Stereo, 5.1, 5.3 and 6.1
19 BassMgt. 95Hz Music, video and post for domestic (Not Cinema) use - 0 0 0 0 0 0 0dB Gain 95Hz Off Off
Stereo, 5.1, 5.3 and 6.1
20 BassMgt. 110Hz Music, video and post for domestic (Not Cinema) use - 0 0 0 0 0 0 0dB Gain 110Hz Off Off
Stereo, 5.1, 5.3 and 6.1
21 BassMgt. 115Hz Music, video and post for domestic (Not Cinema) use - 0 0 0 0 0 0 0dB Gain 115Hz Off Off
Stereo, 5.1, 5.3 and 6.1
22 BassMgrt.120Hz Music, video and post for domestic (Not Cinema) use - 0 0 0 0 0 0dB Gain 120Hz Off Off
Stereo, 5.1, 5.3 and 6.1
23 Cinema Flat Mixing for Cinema without compensation 0 0 -3 -3 0 0dB Gain Off Off Off
for X-curve. 5.1
24 Cine X-curve Mixing for Cinema in a small room - compensates 0 0 -3 -3 0 0dB Gain Off On Off
for X-curve. 5.1
25 Cine X-curve2 Mixing for Cinema in a small room - compensates 0 0 -3 -3 0 0dB Gain Off Off On
for modified X-curve. 5.1
26 Cinema X+50Hz Mixing for Cinema with small room X-curve 0 0 -3 -3 0 0 0dB Gain 50Hz On Off
compensation and bass Management.
27 Cinema X+80Hz Mixing for Cinema with small room X-curve 0 -3 -3 0 0 0dB Gain 80Hz On Off
compensation and bass Management.
28 CinemX+120Hz Mixing for Cinema with small room X-curve 0 -3 -3 0 0 0dB Gain 120Hz On Off
compensation and bass Management.
29 Cinema 80Hz Mixing for Cinema with Bass management but 0 -3 -3 0 0 0dB Gain 80Hz On Off
without compensation for X-curve
30 Cinema 120Hz Mixing for Cinema with Bass management but 0 -3 -3 0 0 0dB Gain 120Hz Off Off
without compensation for X-curve
31 OB Van 120Hz OB vans and very small rooms where rear-channels 0 -2 -2 0 0 0dB Gain 120Hz Off Off
are close to sweetspot
32 Neutral All parameters neutral - a good starting point 0 0 0 0 0 0dB Gain Off Off Off
X-curve #1 - ANSI / SMPTE222M (1.5dB roll off per oct. from 2kHz))
X-curve #2 - ANSI / SMPTE222M Mod. (3dB roll off per oct. from 4kHz)
LFE Gain - Please note that in general the LFE channel should be mixed with +10dB headroom. If you are not able to boost your LFE monitor output from your console, +10dB
gain can be added on your Subwoofer input. Most encoder/decoder formats take the LFE boost into account, meaning that you should leave the Subwoofer LFE gain at 0dB
when playing back a DTS
™
or DOLBY
™
encoded material on your Precision iDP
™
system.
51
ACTIVE STUDIO MONITORS
To Next Page
Loading...
