EasyManua.ls Logo

Tannoy ACTIVE STUDIO MONITORS - Page 52

Tannoy ACTIVE STUDIO MONITORS
56 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
52
Cables
Below is a guide to the cables used in iDP
set-up’s.
TC LINK Standard Cat-5 cables
Maximum Cable Length : 15 metres.
Cable type : Shielded Ethernet Cable Category 5.
Connector type : RJ45
This connection carries Digital audio (24 bit) and network control information.
P1 (pin No.) P2(pin No.) Colour
1 1 Brown
2 2 White/Brown
3
3 Green
4 4 White/Blue
5 5 Blue
6 6 White/Green
7 7 Orange
8 8 White/Orange
AES/EBU Standard cables
Maximum Cable Length: 100 m
Cable type: 110 Ohm
Connector type: XLR
Serial to Cat-5 cable
This cable is included with the iDP SOFT
and PC-iP
.
This is a proprietary cable with integral
Electronics. For use with iDP
Systems only.
USB to COM 9pin
This cable isNOT included with iDP SOFT
or PC-iP
.
Use this type of converter along with the Cat5 to Serial cable
described above if your computer has a USB connection
only and no serial port.
Pin1 Pin1 Ground
Pin2 Pin2 Hot (+)
Pin3 Pin3 Cold (-)
ACTIVE STUDIO MONITORS

Related product manuals