TECHNICAL SPECIFICATIONS
SYSTEM
Frequency response (1): 40 Hz - 50 kHz
Maximum SPL
(2): 118 dB Distortion < 0.8%
Amplifier Input: 22 kΩ balanced on combined XLR/jack
Sensitivity: 0.775 Vrms (0 dBu)
Crossover frequencies: 1.7 kHz & 14kHz
Amplifier output power: LF 150 W / HF 150 W / ST 30W
Output noise: 80 dBV
Power supply: Fixed mains voltage - IEC inlet with detachable power cord
Power consumption: 10 to 160 VA
Type: Low frequency design optimised bass-reflex loaded, 12 litres
Drive unit: Tannoy shielded 160mm (6.5") bass driver
Tannoy shielded: 25mm (1") soft dome tweeter
Construction: Laminated birch / MDF baffle.
Finish: Grey suede paint finish - Black on SuperTweeter™
Dimensions H x W x D: 340mm (13 “) x 210mm (8 “) x 260mm (10 “)
Cabinet weight: 15 kg (33lbs)
Pack dimensions H x W x D: 440mm (17 “) x 620mm (24 “)x 290mm (11 “)
Shipping weight: 18.5 kg (40.7lbs)
ELECTRONIC SECTIONCABINETSHIPPING
NOTES
(1) +/- 3 dB , measured at 1m in an anechoic chamber. (2) Peak SPL at mix position for 1 pair driven
Tannoy operates a policy of continuous research and development. The introduction of new materials or manufacturing methods will always equal or exceed the published specifications which
Tannoy reserve the right to alter without prior notice. Please verify the latest specifications when dealing with critical applications.
17
3
/
8
3
/
8
3
/
8
3
/
8
2
/
8
2
/
8
To Next Page
Loading...
Need help?
General
