11. Technical Specifications
System Type All Weather Loudspeaker
Frequency Response +/
-
3dB
(1) 80Hz - 22kHz
Sensitivity 2.83 Volts @ 1 meter (3) 90dB (anechoic) 93dB (half-space)
Impedance Nominal 6Ω
Minimum 3.8Ω
Power Handling
(2) Average Programme Peak
50 Watt 100 Watt 200 Watt
Maximum SPL
THP 30 Transformer THP 60 Transformer Low Impedance
105dB (average) 106dB (average) 107dB (average) 113dB (peak)
DI Averaged @1kHz (ISO) 3.9
@2kHz (ISO) 7.9
@4kHz (ISO) 8.6
@8kHz (ISO) 10.3
@16kHz (ISO) 9.2
Q Averaged @1kHz (ISO) 2.5
@2kHz (ISO) 6.1
@4kHz (ISO) 7.2
@8kHz (ISO) 10.7
@16kHz (ISO) 8.3
Driver Complement 1 x 127mm (5”) ICT™ Point Source
Enclosure 4.6 litre polypropylene
Finish Black or White
Connectors 2 x 4mm binding posts
Fittings 2 x yoke fixing points
Dimensions 224 x 163 3/8 x 153mm
(8
7
/8 x6
3
/8 x6
1
/8“)
2kg (4lbs 8oz)
Weight (each)
Accessories MB5Y and MB5B mounting brackets
Shipping Dimensions 302 x 168 x 168mm
(12
7
/8 x6
3
/8 x6
3
/8“)
Shipping Weight 2.3kg (5lbs)
NOTES: (1) Average over stated bandwidth. Measured at 1 meter on axis.
(2) Long term power handling capacity as defined in EIA standard RS - 426A.
(3) Unweighted pink noise input, measured at 1 meter in an anechoic chamber
A full range of measurements, performance data, and Ease™ Data can be downloaded from www.tannoy.com
Tannoy operates a policy of continuous research and development. The introduction of new materials or manufacturing
methods will always equal or exceed the published specifications, which Tannoy reserves the right to alter without prior
notice. Please verify the latest specifications when dealing with critical applications.
1 x female gimble plate
To Next Page
Loading...
Need help?
General
