We would recommend that you always
keep the cable runs the same length
for each speaker. Remember that cable
construction can affect the sound
quality so be prepared to experiment
to nd a cable that suits your listening
preference and audio system.
CABLE CHOICE
Always use the best quality of cable
available within your budget. High
quality audio signals passing from the
amplier to the loudspeaker are unusual
in their demands on the cable. Wide
dynamic range and frequency
bandwidth information has to
coexist with the ability to transmit
peak currents of at least 10 amps,
without incurring any loss or signal
impairment. This is why the sound
quality of the information reproduced
by the loudspeakers is so dependent
on the physical properties of the cables
connecting them to the amplier.
To Next Page
Loading...
