Tannoy KINGDOM ROYAL - Single Wire Connections

36
36
37
Correct polarity of the connections
between the amplier and speakers is
essential. The positive terminal on the
amplier left channel, marked + (plus)
or coloured red, must be connected to
the positive terminal on the left
loudspeaker. The negative terminal
on the amplier left channel, marked
- (minus) or coloured black, must be
connected to the negative terminal on
the left loudspeaker.
Repeat this connection for the right
speaker. Good quality cables and tight,
well-made connections are necessary to
eliminate resistive losses and maintain
the correct damping of the loudspeaker
by the amplier.
Connect the loudspeakers to the
amplier using a high quality cable.
Your dealer will be able to make
recommendations. The terminals will
accept either spade or banana plugs.
Fit the link wires from the accessories
box, (see g. 2).
Arrange the connections so that the
right hand amplier channel terminals
are connected to the right hand
loudspeaker as viewed from the
listening position.
SINGLE WIRE CONNECTIONS