Tannoy Precision - Technical Specifications: Precision 6.4, 6 C; Precision 6.4 Specifications; Precision 6 C Specifications

010_ PRECISION MANUAL
TECHNICAL SPECIFICATIONS
Precision 6.4 Precision 6C
PERFORMANCE
Recommended amplier power
(watt RMS)
20 - 200 20 - 175
Continuous power handling
(watt RMS)
100 87
Peak power handling (watt) 400 350
Sensitivity (2.83 volt @ 1 m) 90 dB 90 dB
Nominal Impedance (ohm) 8 8
Frequency response (-6 dB) 29 Hz - 35 kHz 36 Hz - 35 kHz
Dispersion (degrees conical) 90 90
DRIVE UNITS
Dual Concentric high frequency 25 mm (1”) Titanium dome
with Tulip WaveGuide™
25 mm (1”) Titanium dome
with Tulip WaveGuide™
Dual Concentric low frequency 150 mm (6”) treated paper
pulp cone with rubber
surround. 44 mm (1.75”)
edge wound voice coil
150 mm (6”) treated paper
pulp cone with rubber
surround. 44 mm (1.75”)
edge wound voice coil
Bass Driver 150 mm (6”) treated paper
pulp cone with rubber
surround. 44 mm (1.75”)
edge wound voice coil
150 mm (6”) treated paper
pulp cone with rubber
surround. 44 mm (1.75”)
edge wound voice coil
Passive radiator 2 x 150 mm (6”) treated
paper pulp cone with rubber
surround, mass loaded
150 mm (6”) treated paper
pulp cone with rubber
surround, mass loaded
CROSSOVER
Crossover frequency 170 Hz, 1.6 kHz 170 Hz, 1.6 kHz
Crossover Type Passive low loss 2nd
order LF, 1st order HF
Passive low loss 2nd
order LF, 1st order HF
CONSTRUCTION
Enclosure type Passive radiator Passive radiator
Volume 44.1 l (1.56 cu. ft.) 20.3 l (0.72 cu. ft.)
Dimensions (H x W x D)
(excl grille)
1052 x 310 x 352 mm
(41.42 x 12.20 x 13.86”)
237 x 585 x 256 mm
(9.93 x 23.03 x 10.08”)
Weight 21.8 kg (48.1 lbs) 13.0 kg (28.7 lbs)