Tannoy Reveal 501A - Unpacking; Caution; Self Adhesive Feet; Positioning

11
12
13
14
15
16
17
18
19
20
6 UNPACKING
Check carefully for any sign of transit damage. In this unlikely event, notify your shipping company and/or dealer as soon as
possible for advice.
It is recommended you store all the packaging to allow protected transport in future.
Ensure that the following accessories are present:
• Mains cord appropriate to your country of use.
• 4 self adhesive feet
7 CAUTION
These loudspeakers are capable of generating high sound levels over a sustained period of time. Because of their low levels of
distortion, it is not always obvious that the sound level is high when working with them. Please be aware that exposure to
excessive levels over a sustained period of time can lead to permanent hearing damage.
8 SELF ADHESIVE FEET
These can be applied to the underside of the loudspeaker enclosure for stability and to reduce vibration. Alternatively, various
proprietary supports are available from your dealer.
9 POSITIONING
Theseloudspeakersaredesignedasneareldmonitors,positionedtypically0.75-3metresfromthelistener.Theywilltypicallybe
sited on the mixer metering bridge, or on a table either side of a smaller mixing desk or control surface.
They may also be mounted on appropriate loudspeaker stands, which in terms of stability and vibration, will yield the
best results.
In all cases however, they should be angled towards the listener, with the tweeter at ear height approximately. For best uniform
dispersion, they should be mounted vertically, and not on their sides.