Tannoy Reveal 501A - Declaration of Conformity

16
DECLARATION OF CONFORMITY
The following apparatus is/are manufactured in China by Tannoy Ltd of Rosehall Industrial Estate, Coatbridge, Scotland,
ML54TF.ThefollowingequipmentismarkedwiththeCElabelandconform(s)totheprotectionrequirementsoftheEuropean
Electromagnetic Compatibility Standards and Directives. The apparatus is designed and constructed such that electromagnetic
disturbances generated do not exceed levels allowing radio and telecommunications equipment and other apparatus to
operate as intended, and, the apparatus has an adequate level of intrinsic immunity to electromagnetic disturbance to enable
operationasspeciedandintended.
Details of the Apparatus: Reveal 501a Studio Monitor
Reveal 601a Studio Monitor
TheequipmentlistedaboveiscoveredbythiscerticateandmarkedwiththeCE-label,conformstothe
following standards:
EN 60065 Safety requirements for mains operated electronic apparatus for
(IEC60065)  householdandsimilargeneraluse.
EN 55013 Sound and television broadcast receivers and associated equipment.
Radio disturbance characteristics, limits and methods of measurement.
EN 55020 Sound and television broadcast receivers and associated equipment.
Immunity characteristics, limits and methods of measurement.
With reference to regulations in following directives:
73/23/EEC, 89/336/EEC and 2004/108/EC
Signed:
Name: Philippe Robineau
Position: Director of Engineering
Date: 15/12/2009
For Tannoy Ltd.