Tannoy Reveal 501A - Connecting Your Speakers; User Controls; Cabinet Care; Amp Panels

11 CONNECTING YOUR SPEAKERS
ALWAYS MAKE AND CHECK ALL CONNECTIONS BEFORE PLUGGING YOUR MONITORS INTO THE MAINS.
LinelevelinputmaybebyeitherXLR(balanced)orjackplug(unbalanced).XLRpinoutsare:2=+ve(hot),3=-ve(cold)
and1=screenorsignalground.TheXLRinputmayalsobeusedforunbalancedoperation,byconnectingpins3and1
together.
12 USER CONTROLS
The rear mounted volume control allows for matching to your mixing desk or other equipment. It will also allow
you to adjust the relative levels between speakers in a surround system, to allow for positioning.
The HF trim control adjusts the tweeter volume from 2.3kHz upwards, and should be normally set to the 0dB
position. For a bright environment, set to the -1.5dB position, and for a dull one, use the +1.5dB setting.
13 CABINET CARE
The cabinet may be cleaned with a soft lint free cloth. The use of solvents or abrasive cleaners should be
avoided.
14 AMP PANELS
Reveal 501a Reveal 601a
㎮ 䟄 㽷 ㎞



6”
0 2010/1/5
BACKGORUND COLOR: B lack
PRINTING COLOR: W HITE
302-AL-05287-0BAE
ࢌІ်