Tannoy VX SERIES - Page 19

12. Technical Specifications
VX Series Operation Manual rev 3.0.0
19
Model VX 8M VX 8.2 VX 12
Performance
Frequency Response (-3 dB)
1)
85 Hz – 35 Hz 80 Hz – 35 Hz 70 Hz – 25 Hz
Frequency Range (-10 dB) 1 62 Hz – 45 kHz 60 Hz – 45 kHz 55 Hz – 38 kHz
System Sensitivity (1 W @1 m)
2)
92 dB (1 W = 2.83 V for 8 ohms) 93 dB (1 W = 2.83 V for 8 ohms) 97 dB (1 W = 2.83 V for 8 ohms)
Dispersion (degrees conical) 90 degrees conical 90 degrees conical 90 degrees conical
Driver Complement 1 x 200 mm (8.00”) constant 1 x 200 mm (8.00”) constant 1 x 305 mm (12.00”) constant
directivity Dual Concentric directivity Dual Concentric directivity Dual Concentric
1 x 200mm (8.00”) bass driver
Crossover Passive 1.7 kHz Passive 360 Hz and 1.5 kHz Passive 1 kHz with HF protection
with dynamic HF protection with dynamic HF protection
Directivity Factor (Q) 6.8 (averaged 1 kHz to 8 kHz) 8.1 (averaged 1 kHz to 8 kHz) 9.6 (averaged 1 kHz to 8 kHz)
Directivity Index (DI) 9.2 (averaged 1 kHz to 8 kHz) 9.2 (averaged 1 kHz to 8 kHz) 9.8 (averaged 1 kHz to 8 kHz)
Rated Maximum SPL (2) Average: 113 dB Average: 116 dB Average: 120 dB
Peak: 119 dB Peak: 122 dB Peak: 126 dB
Power Handling Average: 130 W Average: 200 W Average: 200 W
Programme: 260 W Programme: 400 W Programme: 400 W
Peak: 520 W Peak: 800 W Peak: 800 W
Recommended Amplier Power 260 W @ 8 ohms 400 W @ 8 ohms 400 W @ 8 ohms
Nominal Impedance 8 ohms 8 ohms 8 ohms
Distortion
10% Full Power (10.2 V) 2nd Harmonic 3rd Harmonic 2nd Harmonic 3rd Harmonic 2nd Harmonic 3rd Harmonic
250 Hz 0.12% 0.15% 0.58% 0.34% 0.52% 0.58%
1 kHz 0.23% 0.84% 0.34% 0.69% 2.98% 0.63%
10 kHz 1.35% 0.16% 1.73% 0.15% 3.58% 0.19%
Distortion
10% Full Power (10.2 V) 2nd Harmonic 3rd Harmonic 2nd Harmonic 3rd Harmonic 2nd Harmonic 3rd Harmonic
250 Hz 0.16% 0.14% 0.15% 0.15% 0.10% 0.26%
1 kHz 0.09% 0.53% 0.11% 0.37% 0.81% 0.58%
10 kHz 0.53% 0.17% 0.74% 0.22% 1.18% 0.03%
Construction
Enclosure 16.28 litre, 15 mm (0.62”) birch plywood, 24.97 litre, 15 mm (0.62”) birch plywood, 36.07 litre, 15 mm (enclosure)
vented and internally braced. vented and internally braced. and 18 mm (front) birch plywood
vented and internally braced
Finish Textured black or white paint, Textured black or white paint, Textured black or white paint,
with custom colours on request. with custom colours on request. with custom colours on request.
Powder coated perforated steel grille Powder coated perforated steel grille Powder coated perforated steel grille
Airnet cloth behind Airnet cloth behind Airnet cloth behind
Connectors 2 x speakON NL4MP 2 x speakON NL4MP 2 x speakON NL4MP
and Barrier strip and Barrier strip
Fittings 3 x M10 ying inserts (portrait
mounting),
1 x Integrip carrying handle,
Integral Pole Mount for standard
35mm poles
4 x M10 Flying inserts,
2 x M10 yoke bracket inserts
2 x Integrip carrying handles
Blanking plate for optional VTH
pole mount
8 x M10 Flying inserts (portrait or
landscape mounting),
8 x M10 yoke bracket inserts,
2 x Integrip carrying handles,
Blanking plate for optional VTH pole
mount,
Fixings compatible with Omnimount
TM
and Powerdrive
TM
style brackets,
4 x M6 inserts
Dimensions (H x W x D) W: 280 mm (11.0”), W: 280 mm (11.0”), W: 370 mm ( 14.6”),
H: 388 mm (15.3”), H: 590 mm (23.2”), H: 486 mm (19.1”),
D: 315.7 mm (12.4”) D: 275 mm (10.8”) D: 360 mm (14.1”)
Net Weight 9 kg (19.8 lbs) 15.5 kg (34.2 lbs) 17.0 kg (37.5 lbs)
Shipped Weight 20 kg (44.1 lbs) 17.5 kg (38.6 lbs) 19.5 kg (43.0 lbs
Packed Quantity 2 1 1
(1) Average over stated bandwidth. Measured at 1 metre on axis in an anechoic chamber.
(2) Unweighted pink noise input, measured at 1 metre in an anechoic chamber.
A full range of measurements, performance data, and EaseTM Data can be downloaded from www.tannoy.com.
Tannoy operates with a policy of continuous research and development. Product performance always will equal or exceed published specications. However, following introduction of new
materials or manufacturing methods, Tannoy reserves the right to alter specications without prior notice.