TaoTronics HELLO TT-AH007 - Product Diagram; Adding Water

Product Diagram
①
②
③
④
⑤
⑥
⑦
⑧
⑨
Nozzle
Water Tank Lid
Water Tank
Filter
Water Inlet Cap
Cleaning Brush
Base
LED Display
Touchpad
Adding Water
• Remove the water tank lid, lift the water tank from the base, and turn it
upside down.
• Twist the tank cap counterclockwise to remove the cap and add clean
water into the tank. Make sure water does not overow.
Note: Please rotate the cap gently; do not screw with too much force to
avoid hurting your hand or the product.
• Put the cap back on the tank and screw clockwise to lock in place. Stop
twisting when no water comes out.
• Put the water tank back on the base.
03/04
④
⑤
⑥
⑧
⑨
⑦
①
②
③