09 10
Clear Pairing
List
Refer to the “Clear Pairing List” section
/
Go into Pairing
Mode
Successfully
paired with
your device
Bluetooth out
of Range /
Failed to pair
with your device
Refer to the “Pairing” section
/
/
Pairing
Connected
Disconnected
Note: Only when you are wearing the earbuds can you hear the voice prompt.
Toot
Turn On / Off
Voice Control
Couple Earbuds Mode:
Tap and hold the Touch Control on the
right earbud for 2 seconds
Single Earbud Mode:
Tap and hold the Touch Control on the
earbud for 2 seconds
CLEANING AND MAINTENANCE
1. Clean the earbuds and the charging case on a regular basis.
2. Use dry and soft cotton cloth to wipe the unit.
Note: Do not insert anything into the product.
3. Keep away from sharp objects to avoid scratches.
4. Put the unit in a dry and shady place if it is to be idle for a long time.
5. Do not clean the product with detergent or chemicals.
No. Problem Solution
Failed to turn on the
earbuds
Earbuds low battery, please charge them
1
Failed to charge the
earbuds
• Place the earbuds into the charging
case properly
• Make sure the charging case is fully charged
2
Can’t charge the
charging case
Make sure the charging cable is intact
and plugged in properly
3
Can’t find
“TAOTRONICS
SoundLiberty 94”
in the Bluetooth device
list
The earbuds reconnected with previously
paired device automatically:
• Deactivate the Bluetooth function of
previously paired device or clear
“TAOTRONICS SoundLiberty 94” from
its Bluetooth device list, and then
search again
• Put the device to be connected close to
the earbuds
4
TROUBLESHOOTING
Turn On/Off
Ambient
Mode
• Tap the Touch Control on the left
earbud twice to turn on/off Ambient
mode
• Single Earbud Mode: Ambient Mode
ON (default)
Ambient Mode
To Next Page
Loading...
