TaoTronics TT-BS003 - F2 - Other Decoding Options; F7 - Define the Buzzer and LED Options; F4 Define the Macro Key Mapping Options

25
；F2 –OTHER DECODING OPTIONS
OPTION
NUMBER
DESCRIPTION TYPE MIN MAX DEFAULT
138 QUIET ZONES
(MARGINS)
BIT 0 1 1-LARGE
139 REVERSE
IMAGE
DECODING
BIT 0 1 0-DISABLED
140 SEND BAR
CODE TYPE ID
BIT 0 1 0-DISABLED
；F7-DEFINE THE BUZZER AND LED OPTIONS
OPTION
NUMBER
DESCRIPTION TYPE
MIN MAX DEFAULT
141 POWER UP BEEP BIT 0 1 1-ENABLED
142 GOOD READ BEEP
TONE 4BIT
4BIT
0 5 2-MEDIUM
143 GOOD READ BEEP
DURATION
BYTE
0 2 1-MEDIUM
144 NO READ LED DELAY BYTE
0 65 20-（2
SECONDS）
145 LED POWER SAVE
MODEBIT
BIT 0 1 0-DISABLED
;F4 DEFINE THE MACRD KEY MAPPING OPTIONS – MAP THE KEY TO A CHARACTER THAT
CAN BE PRODUCED IN A BAR CODE SO THAT WHEN THE BAR CODE IS
SCANNED-THESPECIAL KEY IS OUTPUT
OPTION
NUMBEIR
DESCRIPTION TYPE MIN MAX DEFAULT
160 F1 MACRO BYTE 0 255 255-OFF
161 F2 MACRO BYTE 0 255 255- OFF
162 F3 MACRO BYTE 0 255 255- OFF
163 F4 MACRO BYTE 0 255 255- OFF
164 F5 MACRO BYTE 0 255 255- OFF
165 F6 MACRO BYTE 0 255 255- OFF
166 F7 MACRO BYTE 0 255 255- OFF
167 F8 MACRO BYTE 0 255 255- OFF
168 F9 MACRO BYTE 0 255 255- OFF
169 F10 MACRO BYTE 0 255 255- OFF
170 F11 MACRO BYTE 0 255 255- OFF
171 F12 MACRO BYTE 0 255 255- OFF