TaoTronics TT-BS003 User Manual

USER’S GUIDE
LASER BARCODE SCANNER

TaoTronics TT-BS003 Specifications

General

Brand	TaoTronics
Model	TT-BS003
Category	Barcode Reader
Language	English

Summary

Technical Parameters

Interface Cable Installation

Installation Procedures

Step-by-step guide for connecting the scanner using interface cables.

Scanner Configuration and Features

Multiscan Functions

Configures scanner behavior for multiple or continuous scanning modes.

Reading Mode Settings

Sets scanner operation modes like single scan, multi scan, and trigger options.

Language and Baud Rate

Sets scanner's language output and communication speed (Baud Rate).

Data Bit and Parity Bit Configuration

Configures data bits and parity bits for serial communication.

Symbol On/Off Control

Enables/disables barcode symbologies like CODE11 and CODE128.

Barcode Symbology Support

Enables/disables support for various barcode symbologies like CODE 39, UPC, EAN.

Other Configuration Options

Covers advanced settings like character conversion, termination characters, and preamble codes.

Troubleshooting

Manual Mode and QR Code Reading

How to enter manual mode and if QR codes are supported.

Setup Mode and Factory Defaults

Steps for entering setup mode and restoring factory default settings.

Disabling Auto Tab and ISBN Reading

Disabling auto Tab function and resolving ISBN reading issues.

Barcode Direction and UPC/EAN Settings

Configures barcode direction and specific UPC-A/UPC-E digit handling.

Advanced Barcode Manipulation

Settings for deleting barcode digits, adding characters, and setting date/time.

Function Key and Setup Reset

Configures function keys (F9/F8) and how to reset special setups.