LINE
AUX Cable Connection
1. Plug in the AUX cable into the AUX input port at the back.
LINE
2. Press the power button to change to LINE mode, and the LED display will
show "LINE".
LINE
3. Connect to an AUX device via the cable.
Note:
• Do not insert anything into the product.
CLEANING AND MAINTENANCE
1. Clean the Sound Bar on a regular basis.
2. Use dry and soft cotton cloth to wipe the unit.
3. Keep away from sharp objects to avoid scratches.
4. Put the unit in a dry and shady place if it is to be idle for a long time.
5. Do not clean the product with detergent or chemicals.
Note:
• Once connected to the AUX Output port, the sound will be bypassed
to the audio device connected.
01 03 05 07 09 11
13 15 17 19 21 23
25 27 29 31 33 35
37 39 41 43 45 47
49 51 53 55 57 59
61 63 65
02 04 06 08 10 12
14 16 18 20 22 24
26 28 30 32 34 36
38 40 42 44 46 48
50 52 54 56 58 60
62 64 66
EN EN
To Next Page
Loading...
