Clean the Main Brush Clean the Side Brushes
1. Turn the robot vacuum
over, then unlatch and
remove the main
brush cover.
3. Remove any hair or
debris with the
cleaning brush.
4. Re-install the cap and
main brush. Press on
the main brush cover to
lock it in place.
2. Re-install the side brushes to the slot (black-black;
white-white) and press them tightly to ensure they are
installed in place.
1. Pull rmly to remove the side brushes and remove any
entangled debris. Wipe with a damp cloth if needed.
2. Remove the brush and
its end cap.
11
To Next Page
Loading...
