Tapworks NSC11PRO - Identifying Major Parts of Your Water Softener

3
Please Remember – Only use tablet or pellet salt in your softener!
2
Identifying major parts
of your water softenerNotes
Description Quantity Part no.
All-in-one bypass with check valve with
pre-fi tted lubricated O rings
1 73502
Adaptor clips 1 pair 7116713
Inlet/outlet push-fi t hoses (500mm)
with 22mm connections
2 73502H
Silicone grease 1 n/a
Drain and overfl ow tubing 1 10069
Overfl ow elbow
Overfl ow grommet
1
1
7331258
Drain and overfl ow hose clips 2 n/a
Transformer 1 7323679
Hard water test kit 1 800005
Spares-adaptor O rings 2 n/a
Adaptor elbows – not required when
fi tting the all-in-one bypass
You may need reducers or spigot elbows to fi x to your existing plumbing.
2
5
4
3
1 Control valve cover and
electronic faceplate
5 Brinewell
and cover
2 Salt lid
7 Salt cabinet
6 Overfl ow
connection
3 Water softener
valve and motor
4 Rim