23
Slope Flail Mowers BCRL & BCRM
Item
Part # Description Qty.
1 EGC116-135 Front safety bar for EFGC135 1
EGC116-155 Front safety bar for EFGC155 1
EGC116-175 Front safety bar for EFGC175 1
2 LNM08125 Self-locking nut- M8 x 1.25 6
3 BM0812525 Bolt- M8 x 1.25 x 25 (full thread) 6
4 CP4x25 Cotter pin- M4 x 25 2
5 EGC113-135 Protection Plate Shaft for EFGC135 1
EGC113-155 Protection Plate Shaft for EFGC155 1
EGC113-175 Protection Plate Shaft for EFGC175 1
6 BCM106A Protection plate- M72 x 2 N
BCM106B Protection plate with gap- M72 x 2 N
BCM106C Protection plate- M51 X 2 N
BCM106D Protection plate- M43 X 2 N
7 BCM107 Counter knife 6
8 FW10 Flat washer- M10 24
9 LW10 Lock washer- M10 22
10 BM101525 Bolt- M10 x 1.5 x 25 19
11 BM162085 Bolt- M16 x 2.0 x 85 28
12 BCM112 800gr forging (Galv) hammer 28
13 SLNM162 Self-locking nut- M16 x 2.0 28
14 EGC126-135 Rotor shaft- EFGC135 1
EGC126-155 Rotor shaft- EFGC155 1
EGC126-155 Rotor shaft- EFGC175 1
15 KM100830 Key- M10 x 0.8 x 30 1
16 OS507208 Oil Seal- M50 x 72 x 8 2
17 SRI-72 Snap Ring- Internal- M72 2
18 B2207 Bearing- 2207 2
19 BM1217540 Bolt- M12 x 1.75 x 40 (Full thread) 14
20 BCM120 Rotor Bearing Seat 2
21 SLNM12175 Self-locking nut- M12 x 1.75 24
22 OS506808 Oil seal- M50 x 68 x 8 1
23 GN081S Grease nipple- M8 x 1.0 Straight 4
24 BM1217530 Bolt- M12 x 1.75 x 30 (Full thread) 8
25 BCM225-135 Mower body- BCRM135 1
BCM225-155 Mower body- BCRM155 1
BCRM Assembly
To Next Page
