17
Slope Flail Mowers BCRL & BCRM
Operating Instructions
Maintenance
Maintenance is crucial for the working life and efficiency of any agricultural equipment. If the equipment is
properly maintained and operated, a long working life and operator safety are assured.
The maintenance intervals indicated in this manual are provided as a reference and are related to normal work-
ing conditions. Changes may occur depending on the type of activities, environmental dust, seasonal factors,
etc.
Before beginning:
Check oil level in the center gearbox and the drive tube. Grease rotor bearings.
After 8 hours:
Check oil level in the center gearbox.
Check hardware for tightness.
After 30 hours:
Check hardware for tightness.
Check belt tension and wear.
Center Gearbox Drive Tube
Le Rotor Bearing
Right Rotor Bearing
To Next Page
