MAINTENANCE
Maintenance is crucial for the working life and efficiency of any agricultural equipment. If
the equipment is properly maintained and operated, a long working life and operator safety are
assured.
The maintenance intervals indicated in this booklet are provided as a mere reference and are
related to normal working conditions; some changes may occur depending on the type of activities,
environmental dust, and seasonal factors, etc.
Before beginning:
Check the oil level in the center gearbox and drive support tube and grease the rotor bearings.
After 8 Hours:
Check the oil level in the center gearbox
Check the hardware for tightness. Tighten as necessary.
After 30 hours:
Check the hardware for tightness. Tighten as necessary.
Check the belt tension and inspect for wear
Left: Center Gearbox
Right: Drive Tube
Left: Left Rotor Bearing
Right: Right Rotor Bearing
To Next Page
Loading...
