Need help?Do you have a question about the Taramps Electronics TL-1500 and is the answer not in the manual?
General| Number of Channels | 1 |
|---|---|
| Operating Class | Class D |
| Signal to Noise Ratio | >90dB |
| Input Impedance | 10K OHMS |
| Power Output | 1500W |
| Maximum Power @ 12.6 VDC - 1 OHM | 1500W RMS |
| Frequency Response | 20Hz - 250Hz |
| Output Impedance | 1 Ohm - 2 Ohms |
| Maximum Supply Voltage | 16V |
| Protection System | Thermal, Short Circuit, Overload, DC Offset, Low Voltage |
Illustrates connecting stereo speakers and a subwoofer to the amplifier output.
Shows how to connect the amplifier's input using RCA cables from a head unit.
Details the amplifier's 3-channel design, including HPF and LPF filters.
Provides essential pre-operation instructions and safety advice for the amplifier.
Explains the power indicator and the bass boost feature settings.
Details connecting audio sources via RCA cables and wired connections, emphasizing quality.
Specifies connections for power supply, subwoofer, and stereo outputs, including polarity and impedance.
Describes the system's action to mute audio during short circuits or overheating.
To Next Page
