Need help?Do you have a question about the Taramps Electronics DS440X4 and is the answer not in the manual?
Selects amplifier operation mode: FULL (all range), HPF (high frequencies), or LPF (low frequencies).
Connect speakers following polarity and minimum impedance (2 ohms stereo, 4 ohms bridged).
Connect power to battery (+/-) with 4mm² wire and remote to Head Unit REMOTE output with 0.75mm² wire.
Shuts down the amplifier when detecting short circuits or impedance lower than the supported level.
Details rated power output for 2-ohm stereo, 4-ohm stereo, and 2-channel bridged configurations.
General| Brand | Taramps Electronics |
|---|---|
| Model | DS440X4 |
| Category | Amplifier |
| Language | English |
To Next Page
