Target 3-2-1 Cube - Step 4: Attach Bottom Panel

12
1. Align dowels on nished surface of bottom panel (G) to the unnished edge of dividers (F) and (D) as shown.
2. Push together to secure dowels. Secure the bottom panel to both dividers using four assembly screws.
3. Quickly dip pre-glued dowel into a cup of water, making sure entire dowel gets wet.
4. Immediately push two dowels into center holes on both unnished edges of bottom panel as shown.
D
C
F
E
G
G
4x
4x
(H2)
(H2)
(H2)
(H2)
(H1)
(H1)
(H1)
(H1)
(H1)
(H2)
step 4.
(H1) x 4
pre-glued dowel
(H2) x 4
assembly screw
#10 x 1-1/2 in.