Target MINI CON II - User Manual

OA7619 0A7619
© May, 1995
Printed in U.S.A.
OPERATING INSTRUCTIONS AND PARTS LIST
INSTRUCCIONES DE OPERACIÓN Y LISTA DE PIEZAS
MINI CON II Concrete Saw

Summary

English Section: Operation

Safety Warnings for Saw Operation

Crucial safety guidelines to prevent injury or death during saw operation. Covers do's and don'ts.

Symbol Definitions

Explains the meaning of various safety and operational symbols used in the manual.

General Operation Instructions

Blade Mounting and Preparation

Step-by-step guide for inspecting, mounting, and aligning the saw blade and related components.

Wet Sawing Procedure

Details on ensuring proper water flow for cooling and optimal blade life during wet cutting operations.

Cutting Techniques and Depth

Guidance on proper cutting depth, straight line cutting, and avoiding excessive force.

Saw Operating Features

Maneuvering and Startup

Maneuvering the Saw

Instructions on safely moving the saw, ensuring the blade is clear of the ground.

Starting the Sawing Process

Steps for initiating the cutting process, including water supply and blade lowering.

Finishing a Cut

Maintenance Procedures

Daily Bearing Lubrication

Daily lubrication requirements for rear wheels and blade shaft bearings to ensure longevity.

Blade Shaft Bearing Replacement

Detailed steps for replacing the blade shaft bearings, including eccentric lock types.

V-Belt Tension and Accessories

Blade Shaft V-Belt Tension

Guidelines for proper V-belt tensioning and replacement to prevent damage and ensure performance.

Optional Outer Flange Accessory

Information on an optional accessory for cutting wider kerfs.

Tie Down Bracket Kit Accessory

Details on an accessory for securing the saw during transport.

Governor Speed Specifications

Cutting Capacity and Depths

Spanish Section: Operation

Safety Precautions during Operation

Medidas de seguridad cruciales para prevenir lesiones o muerte durante la operación de la sierra.

Symbol Definitions

Explica el significado de varios símbolos de seguridad y operación utilizados en el manual.

General Operation Instructions (Spanish)

Starting the Saw (Spanish)

Pasos para encender la cortadora, incluyendo modelos a gasolina, neumáticos y eléctricos.

Operating Characteristics (Spanish)

Descripción de las características funcionales clave de la sierra y cómo utilizarlas.

Maneuvering and Cutting (Spanish)

Maneuvering the Saw (Spanish)

Instrucciones para mover la sierra de forma segura, asegurando que el disco esté libre del suelo.

Starting the Cutting Process (Spanish)

Pasos para iniciar el proceso de corte, incluyendo suministro de agua y bajada del disco.

Finishing a Cut (Spanish)

Maintenance Procedures (Spanish)

Daily Bearing Lubrication (Spanish)

Lubricación diaria requerida para ruedas traseras y rodamientos del eje del disco.

Blade Shaft Bearing Replacement (Spanish)

Pasos detallados para reemplazar los rodamientos del eje del disco, incluyendo tipos de traba excéntrica.

Governor Speed and Capacity (Spanish)

Governor Speed Adjustment (Spanish)

Información sobre las velocidades del regulador y su importancia para una operación segura.

Cutting Capacity and Depths (Spanish)

Especificaciones para el tamaño máximo del disco y las profundidades de corte correspondientes.

Parts List Overview

Figure 1 Parts List

Figure 2 Parts List

Target MINI CON II Specifications

General

Brand	Target
Model	MINI CON II
Category	Saw
Language	English