To Next PageTo Next Page
Need help?Do you have a question about the Target PRO 35 III DIESEL and is the answer not in the manual?
Symbols indicating requirements, information, or restrictions.
Symbols related to hazards, required PPE, and transport safety.
Symbols for machine operation, hazards, and work area conditions.
Symbols for machine guards, water supply, and coolant status.
Symbols for work area, noise levels, and pre-operation checks.
Symbols related to maintenance, fuel, and travel speed.
Symbols representing electrical switch states (ON/OFF/START).
Symbols for blade specifications, components, and measurement indicators.
Symbols for brake status, machine weight, battery, and blade indicator.
Symbols related to motor and engine types and their operation.
Warning about exposure to noise levels equal to or greater than 85 dB (A).
Location and identification of instrument panel and depth indicator decals.
Location of operational and safety decals on the machine.
Decals indicating blade rotation and adjustment points.
Decals for throttle control and rear cowl identification.
Decals identifying the specific model of the saw.
Table detailing the physical dimensions of the PRO 65 III model.
Table detailing the physical dimensions of the PRO 35 III model.
Specifications for blade guard, capacity, RPM, depth, axles, wheels, and transmission.
Weight specifications and options like spotlight and pump.
Specifications for blade guard, capacity, RPM, depth, axles, wheels, and transmission.
Weight specifications and options like spotlight and pump.
Specifications for blade guard, capacity, RPM, depth, axles, wheels, transmission, speed, and brake.
Weight specifications and options like spotlight and pump.
Engine and motor specifications for the PRO 65 III Diesel model.
Engine and motor specifications for PRO 35 III Diesel and Electric models.
Charts detailing blade size, RPM, pulley size, and engine speed for PRO 35 III Diesel.
Charts detailing blade size, RPM, pulley size, and engine speed for PRO 65 III Diesel and Electric.
List of recommended actions for safe operation and maintenance.
List of actions to avoid for safe operation and maintenance.
Further prohibited actions to ensure operator safety.
Warning against modifying the saw or using it for unintended applications.
Steps for checking the machine when cold and on a level surface.
Routine maintenance tasks to be performed daily, 50, 100, 250, 500 hours and yearly.
Information on wet sawing and applicable diamond blade sizes and depths.
Procedure for moving the saw with the engine on or off.
Instructions for securing the saw for vehicle transport and lifting.
Essential checks before starting the machine for safety and operation.
Step-by-step guide for correctly installing the diamond blade.
Steps for starting the saw, including water pressure and safety.
Explanation of the blade depth indicator and depth stop features.
How to stop the saw normally and in an emergency.
Steps to diagnose and resolve engine stoppages or blade stalls.
How to adjust the saw for straight cutting.
Instructions for cleaning and lubricating the machine.
Procedure for checking and adjusting belt tension using a gauge.
Guidance on checking and replacing air filter elements and drive chains.
Schedule for replacing fuel filters.
Instructions for aligning sprockets on the PRO 65 Diesel.
Overview of the hydraulic system, fluid checks, and replacement.
How to engage and disengage the optional parking brake.
Advice on tightening bolts, checking belts, and safety precautions.
Guidance on operating the electric saw and monitoring the load meter.
Information on available blade guard conversion kits.
Details on weight kits and various other accessory items.
Explanation of metric and English hardware usage.
Information on where to get repairs done.
Guidelines for ordering spare parts quickly and accurately.
Conversion requirements from 14"/18" to 26" and 30" blade sizes.
Conversion requirements from 26" to 14"/18", 30" blade sizes.
Conversion requirements from 30" to 14"/18", 26" blade sizes.
Conversion requirements from 14"/18" to 26", 30", 36", 48" blade sizes.
Conversion requirements from 26" to 14"/18", 30", 36", 48" blade sizes.
Conversion requirements from 30" to 14"/18", 26", 36", 48" blade sizes.
Conversion requirements from 36" to 14"/18", 26", 30", 48" blade sizes.
Conversion requirements from 48" to 14"/18", 26", 30", 36" blade sizes.
Identification of wiring harness and electrical components in the diagram.
Location of control relays, safety switches, and breakers.
List of part numbers for engine, wiring harness, and cables.
List of part numbers for switches, gauges, and relays.
List of part numbers for battery, pump, starter, and other components.
Identification of wiring harness and electrical components in the diagram.
Location of control relays, safety switches, and breakers.
List of part numbers for engine, wiring harness, and cables.
List of part numbers for switches, gauges, and relays.
List of part numbers for battery, pump, starter, and other components.
Ladder logic for engine start, neutral safety, and emergency stop circuits.
Ladder logic for gauges, fuel solenoid, and water pump control.
Table of designators for control relays, circuit breakers, and fuses.
Table of designators for gauges, motors, solenoids, and switches.
Wiring for motor, overload protection, and safety disconnects.
Wiring for gauges, ignition, neutral switch, and pump control.
List of part numbers for cables, wiring harness, and cords.
List of part numbers for switches, meters, and overload heaters.
List of part numbers for hydraulic pump, water pump, and connectors.
Table for configuring motor for voltage/HP and service requirements.
Instructions and diagrams for wiring the current transformer.
Wiring for 3-phase service, motor control, and overload protection.
Ladder logic for water pump, lift switch, and lower solenoid.
General
