8
Targus Wireless Laser Rechargeable Notebook Mouse
Synchronisation
After your computer detects the USB receiver you must
establish a communications link between the mouse and
its receiver BEFORE you can use the mouse. To do this,
follow the instructions below:
1 Press and release the connect button located on the
bottom of the receiver.
Bottom of Receiver
The receiver’s status light blinks when the receiver is
activated.
2 Press and release the connect button, located on the
bottom of the mouse.
You are now ready to use the mouse.
N
OTE: DUE TO THE IMPROVED TRACKING SPEED OF THE LASER ENGINE, USERS
MAY
FIND THE CURSOR MOVEMENT IS FASTER THAN A CONVENTIONAL OPTICAL
MOUSE
. CURSOR SETTINGS CAN BE CHANGED FROM YOUR COMPUTER’S
CONTROL PANEL.
Mouse Power Management
To power the mouse on and off, slide the on/off switch at
the bottom of the mouse to the desired position.
To Next Page
Loading...
