Tascam 12 Owner's Manual Addendum

Gain boost function
The gain boost function uses DSP processing to amplify signals input through mic/line input jacks. Even input sources with low volumes
can be used at gain knob positions that are easy to adjust.
Anmerkung
The gain boost function will also amplify background noise. When an input source has sucient volume, set its GAIN BOOST function
to OFF in order to suppress noise.
1. When the recorder is stopped, select MIXER on the MENU
Screen, and open the MIXER Screen.
For setting procedures, see “Das Menü nutzen (Beispiel)”
in “2 - Die Bedienelemente und ihre Funktionen” of the
Owner’s Manual.
2. Select GAIN BOOST on the MIXER Screen, and open the
GAIN BOOST Screen.
3. Turn the MULTI JOG dial to select the channel with the GAIN
BOOST setting to be changed.
4. Press the MULTI JOG dial to open the setting screen for the
selected channel.
5. Turn the MULTI JOG dial to select the amount of gain boost.
Options: OFF (Voreinstellung), +6dB, +12dB
6. Press the MULTI JOG dial to conrm the setting.
The GAIN BOOST Screen will reopen.
o The number icons of channels that have gain boost applied
will be changed as follows on the channel input level meter
and LIVE INPUT screens.
Display indicator Meaning
This is shown when any channels
have gain boost on
These icons show channels with gain
boost
These icons show channels with gain
boost o
Model 12

Tascam 12 Specifications

General

Channels	12
EQ Bands	3-band
Phantom Power	Yes
Faders	6
Power	AC Adapter