Need help?Do you have a question about the Tascam CA-XLR2d and is the answer not in the manual?
Details and identifies the various parts and controls of the main CA-XLR2d unit.
General steps for preparing the CA-XLR2d unit before use.
Details the two ways to power the unit: from a camera or using AA batteries.
Explains how to power the unit using a connected camera's power supply.
Step-by-step guide on installing and configuring AA batteries for power.
Instructions on how to connect the CA-XLR2d unit to various cameras.
Specific steps for connecting CA-XLR2d-C and CA-XLR2d-F models to cameras.
Specific steps for connecting the CA-XLR2d-AN model to cameras.
Explains how to connect microphones to the unit.
Detailed guide for connecting a single microphone requiring phantom power.
Guide for connecting two microphones to the unit for stereo recording.
Instructions for connecting line-level audio sources like mixers.
Guide for connecting microphones via the mini jack, like stereo lapel mics.
Step-by-step guide on how to turn the unit's power on correctly.
Specific power-on procedures for CA-XLR2d-C and CA-XLR2d-F models.
Specific power-on procedures for the CA-XLR2d-AN model.
How to adjust audio input levels while monitoring on the camera display.
Tips for confirming that audio is being recorded correctly.
How to monitor audio directly from the unit using headphones.
Solutions for when the unit fails to power on.
Steps to take if no audio is being output from the unit.
Addresses errors or power interruptions when connecting to a camera.
Solutions for when the input sound is muted, often related to phantom power.
To Next Page
General