Tascam CD-200 - 7 Specifications; Ratings; General

IMPORTANT SAFETY INSTRUCTIONS
TASCAM CD-200 25
7 − Specifications
PHONES Jack
ª
Headphone Output
Connector: Standard Stereo Jack
Rated Output: 20 mW + 20 mW min.
(When monitoring CD, THD + N 0.1% max., 32Ω
load)
DIGITAL OUTPUT [COAXIAL] Terminal
ª
Connector: RCA Pin Jack
Compatible Signal Format: IEC-60958-3 (S/PDIF)
Output Impedance: 75Ω
DIGITAL OUTPUT [OPTICA] Terminal
ª
Connector: Optical Jack
Compatible Signal Format: IEC-60958-3 (S/PDIF)
General
Power Requirement
ª
AC 120 V, 60 Hz (U.S.A./Canada)
AC 230 V, 50 Hz (U.K./Europe)
AC 240 V, 50 Hz (Australia)
Power Consumption
ª
11 W
Dimensions (W x H x D)
ª
481 x 94.5 x 298 (mm) / 18.94 x 3.72 x 11.73 (in)
Weight
ª
4.2 kg (9.259 lb)
Operating Temperature
ª
5 to 35°C
Inclination of installation
ª
5° or less
Illustrations and other depictions may differ in part
•
from the actual product.
Specifications and external appearance may be changed
•
without notification to improve the product.
Ratings
Compatible disc formats
ª
CD-DA (12-cm/8-cm), CD-ROM (12-cm/8-cm) ISO 9660
LEVEL 1/2/ROMEO/JOLIET format (CD-R/CD-RW
DISC compatible)
MP3 playback specifications
ª
Audio Mode: STEREO/JOINT STEREO/DUAL
CHANNEL/MONO/VBR
MPEG 1 Audio Layer III (MP3)
•
Sampling Frequency: 32 kHz/44.1 kHz/48 kHz
•
Bit Rate: 32 kbps - 320 kbps
•
WAV playback specifications
ª
Sampling Frequency: 8 kHz/11.025 kHz/12 kHz/16
kHz/22.05 kHz/24 kHz/32 kHz/44.1 kHz/48 kHz
Sampling Bit Rate: 8 bit/16 bit
Audio CD Playback Specifications
ª
Sampling Frequency: 44.1 kHz
Sampling Bit Rate: 16 bit
Number of Channels: 2
Audio Performance
ª
Frequency Response: 20 Hz - 20 kHz ±1.5 dB
Signal-to-Noise Ratio (S/N): More than 90 dB (20 kHz
LPF + A-weighted)
Distortion (THD + N): Less than 0.01% (1 kHz: 20 kHz
LPF)
Dynamic Range: 90 dB min.
Channel Separation: 90 dB min. (1 kHz: 1 kHz BPF)
ANALOG OUTPUT [UNBALANCED] Terminal
ª
Connector: RCA pin jack
Reference Output Level: –10 dBV
Maximum Output Level: +6 dBV
Output Impedance: 200Ω
7 − Specifications