Need help?Do you have a question about the Tascam CD-200iL and is the answer not in the manual?
Audio Input and Output| analog audio input reference input level | -20dBV |
|---|---|
| analog audio input maximum input level | -4dBV |
| analog audio input impedance | 22kΩ |
| analog audio output impedance | 200Ω |
| analog audio output reference output level (CD) | -10dBV |
| analog audio output maximum output level (CD) | +6dBV |
| phones maximum output level | 20mW + 20mW or more (THD+N 1% or less, into 32Ω load) |
| digital audio output impedance | 75Ω |
Audio Performance| frequency response | 20Hz to 20kHz, +/-1.0dB (during playback, JEITA) |
|---|---|
| S/N ratio | More than 90dB (during playback, JEITA) |
| distortion | Less than 0.01% (during playback, JEITA) |
| dynamic range | More than 90dB (during playback, JEITA) |
| channel separation | More than 90dB (during playback, JEITA) |
Power| power supply (U.S.A./Canada) | AC120V, 60Hz |
|---|---|
| power supply (U.K./Europe) | AC230V, 50Hz |
| power supply (Australia) | AC240V, 50Hz |
| power consumption | 15W |
Operating Environment| operating temperature | 5 to 35°c |
|---|---|
| inclination of installation | 5° or less |
Weight and Dimensions| dimensions (W x H x D) | 481 x 94.5 x 298 mm |
|---|---|
| weight | 5.2kg (11.5 lb.) |
General safety guidelines, user warnings, and compliance information for electrical safety.
Instructions for safe installation, including rack-mounting, ventilation, and environmental warnings.
Precautions regarding battery handling and laser radiation safety compliance.
Guidelines for environmentally responsible disposal of electronic waste and batteries.
Details on unit capabilities, supported formats, connectivity, and manual conventions.
Guidance on placement, power, disc handling, cleaning, and user registration.
Identifies front panel buttons, jacks, and the iPod dock connector.
Details rear panel connections and explains display indicators.
Describes the buttons and functions of the TASCAM RC-CD200iL remote control.
Guides on making system connections and setting up the iPod/iPhone dock.
Instructions for connecting external players, preparing the remote, and loading CDs.
How to choose the audio playback source (CD, DOCK, AUX IN).
Information on playable discs, file formats, and basic playback modes.
Methods for selecting tracks, searching, and folder playback on data CDs.
Setting, checking, editing, and clearing programmed playback sequences.
Details on repeat playback, display information, pitch control, and intro check.
Instructions for connecting iPod/iPhone devices and controlling playback via the unit.
How to set the iPod/iPhone as the audio source for playback.
Lists operation, warning, and error messages with their meanings and recommended actions.
A guide to diagnosing and resolving common problems like no power, sound, or connectivity issues.
Details supported disc types, file formats, dynamic range, and channel separation.
Information on input/output levels, impedance, and connector types for audio signals.
Covers power requirements, consumption, weight, operating temperature, and physical dimensions.
To Next Page
