Why does my Tascam Recording Equipment CD-RW900 not retain settings?
If your Tascam CD-RW900 is not retaining settings, it might be because the power is being turned off too soon after making a setting change. To prevent this, avoid turning off the power immediately after adjusting settings.
What to do if my Tascam Recording Equipment has no sound output?
If there is no sound output from your Tascam Recording Equipment, first, confirm the connections with the audio system. Then, check the volume level and ensure proper amplifier operation.
What to do if my Tascam CD-RW900 Recording Equipment isn’t recording?
If recording is not possible on your Tascam Recording Equipment, take these steps: 1. Confirm the connections with the audio system. 2. Adjust the recording level. 3. If you're still having trouble, the disc may be for playback only. Replace it with a recordable disc.
Details of buttons, display, and jacks on the front unit.
Explains input/output jacks and power connection on the rear.
Explains Continuous, Single, Program, and Random playback modes.
Details on repeat playback, pitch, and key control.
Step-by-step guide to start and stop recording.
Process to finalize CD-R/RW discs for playback compatibility.
Lists error messages, operational messages, and troubleshooting solutions.
General| Type | CD Recorder |
|---|---|
| Media Format | CD-R, CD-RW |
| Sample Rates | 44.1 kHz |
| A/D Conversion | 24-bit |
| D/A Conversion | 24-bit |
| Analog Outputs | 2 x XLR, 2 x RCA |
| Digital Inputs | 1 x coaxial, 1 x optical |
| Digital Outputs | 1 x coaxial, 1 x optical |
| Headphone Output | 1 x 1/4" TRS |
| Remote | Yes |
| Rackmountable | Yes |
| Sampling Frequency | 44.1 kHz |
| USB Port | No |
| CD Text | Yes |
| Recording Formats | CD-DA |
| Bit Depth | 16-bit |
To Next Page
