Need help?Do you have a question about the Tascam CD-RW901SL and is the answer not in the manual?
Audio Specifications| quantization bit depth | 16 bit |
|---|---|
| sampling frequency | 44.1 kHz |
| frequency response | 20 Hz~20 KHz ±0.8 dB (playback) ±1.0 dB (recording) |
| signal-to-noise ratio | 95 dB (playback) 90 dB (recording) |
| dynamic range | 95 dB (playback) 90 dB (recording) |
| distortion | 0.006 % (playback) 0.008 % (recording) |
| channel separation | 90 dB (playback) 80 dB (recording) |
| wow and flutter | < 0.001 % (unmeasurable) |
Analog Input Specifications| balanced input level | +4 dBu (Full Scale -16 dB) |
|---|---|
| balanced input impedance | 14 KØ ±5 % |
| unbalanced input level | -10 dBV ±2 dB (Full Scale -16 dB) |
| unbalanced input impedance | 22 KØ ±10% |
Analog Output Specifications| balanced output level | +4 dBu (Full Scale -16 dB) |
|---|---|
| balanced output impedance | 75 Ø ±5 % |
| unbalanced output level | -10 dBV ±2 dB (Full Scale -16 dB) |
| unbalanced output impedance | 600 Ø ±10% |
Power| power supply (U.S.A./Canada) | 120 VAC, 60Hz |
|---|---|
| power supply (U.K./Europe) | 230 VAC, 50Hz |
| power supply (Australia) | 240 VAC, 50Hz |
| power consumption (U.S.A./Canada) | 17 W |
| power consumption (U.K./Europe/Australia) | 19 W |
Weight and Dimensions| dimensions (d x w x h) | 308.7 x 482.6 x 94 mm / 12.2 x 19.0 x 3.7 in |
|---|---|
| weight | 4.7 kg (10.4 lb) |
Details how to connect the unit to other audio equipment using various digital and analog input/output jacks.
Explains the pinouts for the CONTROL I/O terminal and wiring for external fader start/stop control.
Describes the functions of each button, dial, and jack on the front panel of the unit.
Details the various input/output connectors and terminals located on the rear of the unit for connectivity.
Explains the indicators and information shown on the unit's digital display during operation and menu selections.
Identifies and describes the function of each button on the supplied remote control unit for convenient operation.
Explains the general procedures for navigating and using the unit's menu system, including selection and confirmation.
Guides the user through basic steps for turning on the unit, inserting a disc, and initiating playback.
Explains how to select tracks for playback, including using the skip function for forward and backward movement.
Describes how to directly select tracks for playback using the remote's number keys or the Jog dial.
Details methods for searching for specific points within tracks or directly to a specified time.
Outlines the different playback modes available: Continuous, Single, Program, and Random.
Explains synchronized playback using external digital clock signals for precise timing.
Details how to set the unit to play a disc automatically when turned on by an external timer.
Describes how to set the unit to continuously repeat playback of a track or the entire disc.
Explains how to set specific start and end points for repeated playback of a section of a track.
Details how to adjust the pitch and playback speed of audio CDs within a range of +/- 16.0%.
Explains how to change the musical key of playback without altering the tempo, useful for vocal practice.
Details how the unit handles and plays back MP3 files, including directory structures and compatibility.
Provides step-by-step instructions for performing a basic recording on a recordable disc, including source selection and level adjustment.
Explains how to connect two CD-RW901SL units for continuous recording and the necessary settings for seamless transfer.
Explains the process of finalizing a disc to make it a standard CD, writing the TOC and making it permanent.
Provides a list of common symptoms encountered with the unit, along with their possible causes and remedies.
Lists the technical specifications of the CD-RW901SL, including electrical, physical, performance, and connectivity details.
To Next Page
