Need help?Do you have a question about the Tascam SS-CDR200 and is the answer not in the manual?
General| Signal-to-Noise Ratio (SNR) | 95 dB |
|---|---|
| Total Harmonic Distortion (THD) | 0.005 % |
| Sample rate | 48 kHz |
| Audio quality | 16 bit |
| Frequency range | 20 - 20000 Hz |
| USB 2.0 ports quantity | 1 |
| Product color | Black |
Weight and Dimensions| Weight | 3700 g |
|---|---|
| Dimensions (WxDxH) | 482.6 x 301 x 44.5 mm |
General safety instructions for operating the apparatus, including placement and cleaning.
Instructions for mounting the unit in a standard 19-inch rack using the supplied kit.
Highlights differences between SS-CDR200, SS-R200, and SS-R100 models.
Lists the main features and capabilities of the SS-CDR200/SS-R200/SS-R100 recorders.
Guidelines for optimal placement and environmental conditions for the unit.
Guidelines for safely handling and using USB, SD, and CF media.
Information on compatible media and the importance of formatting.
Identifies and describes the functions of the front panel controls.
Details functions of controls like SKIP, LOCK, SHIFT, PITCH, PHONES, USB, and SD/CF slots.
Explains STOP, PLAY, READY, RECORD buttons and KEYBOARD connector.
Diagram and description of all rear panel input/output and control connectors.
Details the functions of each button on the wired remote control unit.
Describes the TRACK, TOTAL, TITLE, and FOLDER display modes of the Home Screen.
Explains how to view and change settings via the FUNCTION screen.
Describes the TRACK, TOTAL, TITLE, and FOLDER modes of the Recording Screen.
Overview of the main menu items and their respective submenus.
Describes FUNCTION, DEVICE, and MULTI JOG dial controls and their operations.
Explains the FUNCTION screen for recording settings and status.
Illustrates example connections for the SS-CDR200 unit.
Procedures for powering the unit, setting date/time, and adjusting display.
Adjusting display brightness and inserting/ejecting SD/CF cards.
Steps for formatting USB, SD, and CF media for the unit.
How to select the current media device (USB, SD, CF, CD) for operation.
Lists the MP3, WAV, and Audio CD formats supported for playback.
How to select folders/playlists and set playback modes (Continuous, Single, Program, Random).
How to adjust pitch step and use key control playback.
Defines and explains how to set the playback area.
Explains fundamental playback operations like starting, stopping, and pausing.
Guide to setting the file format (MP3, WAV, CD-DA) and related options.
How to monitor input signals and adjust levels and balance.
How to configure sync recording settings for automatic start/stop.
Instructions for copying files from media to create a data CD.
Steps to convert MP3/WAV files to Audio CD format and burn them.
Steps to rip and convert audio CD tracks to MP3/WAV.
How to connect and use the RS-232C port for computer control.
How to use the parallel connector for external controller and RC-SS20.
To Next Page
