Need help?Do you have a question about the Tascam DP-32 Digital Portastudio and is the answer not in the manual?
General| Track Count | 32 |
|---|---|
| Simultaneous Recording Tracks | 8 |
| Input Channels | 8 |
| Phantom Power | Yes |
| Built-in Effects | Yes |
| Storage Media | SD/SDHC Card |
| Weight | 6.2 kg |
| Simultaneous Playback Tracks | 32 |
| Outputs | Stereo Out, Monitor Out, Headphone Out |
| Effects | Reverb, Delay, Chorus, Flanger |
| Display | Color LCD |
| USB | Yes (USB 2.0) |
| Digital Output | S/PDIF |
| Sampling Rate | 44.1 kHz, 48 kHz |
| Bit Depth | 16/24-bit |
| EQ | 3-band EQ per channel |
User instructions regarding FCC compliance and interference.
Guidelines for proper disposal of electrical and electronic equipment (WEEE).
Compliance statement for Class A digital apparatus.
Precautions regarding the unit's classification as a Class 1 laser product.
How to connect guitars and microphones to the unit's inputs.
Assigning the guitar input to a specific track for recording.
Guide to setting input levels using TRIM knobs and checking overload indicators.
Identifies input indicators, phantom power buttons, overload indicators, and source selection.
Covers inserting/removing SD cards, write protection, and connecting the power adapter.
Explains the correct procedures for turning the unit on and off to prevent data loss.
How to select inputs, assign them to tracks, and set track types (mono/stereo).
Explains how to monitor signals, select sources, and interpret level meters.
Details peak hold settings, mixer screen adjustments, and equalizer parameters.
Details making initial recordings, multitrack recording, arming tracks, and adjusting pan/level.
Covers setting input levels, initiating recording, and the unit's undo/redo capabilities.
Guide to adjusting the 3-band equalizer for inputs and tracks.
Covers stereo track assignments, stereo bus routing, and phantom power usage.
How to reset assignments and important safety notes for phantom power.
Details the punch in/out technique and how to configure the footswitch.
Explains previewing cue points and setting up automatic punch-in/out recording.
Details rehearsing automatic punch, recording with it, and checking multiple recorded takes.
Explains track bouncing for combining signals and direct location for precise positioning.
Introduces track editing functions and basic procedures.
Explains how to insert and adjust dynamic effects like compressors and noise suppressors.
Details inserting, adjusting, loading, and saving guitar effects.
Covers mixing down tracks, adjusting levels, and using fader groups.
Explains how to set start/end points and create a stereo master file.
Details checking the master file and introduces mastering tools.
Outlines mastering steps and how to use the mastering equalizer for sound adjustment.
Explains using compressors to adjust dynamics and loudness.
Explains how to quickly format an SD card to prepare it for use with the unit.
Outlines OS compatibility and how to connect the unit to a computer via USB.
Explains importing WAV files from a computer and exporting track files.
Addresses SD card recognition, no sound, and distorted sound issues.
Troubleshooting recording failures and hum/noise problems.
Resolves problems with the disc tray not opening and audio CD playback/creation failures.
Lists and explains general messages during operation, with remedies.
Details technical specs for audio I/O, MIDI, USB, audio performance, and OS requirements.
To Next Page