Need help?Do you have a question about the Tascam DP-01 and is the answer not in the manual?
General| Tracks | 8 |
|---|---|
| Simultaneous Recording Tracks | 2 |
| Phantom Power | Yes |
| Display | LCD |
| Sampling Frequency | 44.1 kHz |
| A/D Resolution | 24-bit |
| D/A Resolution | 24-bit |
| Power Supply | AC adapter |
| Inputs | 2 x XLR/TRS combo |
| Outputs | Stereo RCA |
| EQ | 2-band per channel |
| Effects | Reverb |
Safety information for European users regarding radio interference.
FCC compliance and safety guidelines for US users, including interference.
Introduction to the DP-01, its features, and basic operations for new users.
Instructions on how to properly power the DP-01 unit on and off.
Explains how to use the DP-01's menu system and control interface.
How to name songs, exported tracks, and other items on the DP-01.
How the input mode switch affects monitoring of input signals.
Connecting the DP-01 to monitoring systems and analog recorders.
Connecting external effect processors to the DP-01.
Step-by-step guide to creating a new song project on the DP-01.
Instructions on how to save recorded songs to the DP-01's storage.
Procedure for loading previously saved songs onto the DP-01.
How to delete unwanted songs from the DP-01's storage.
Step-by-step guide to arming tracks and starting the recording process.
Using marks and points to jump to specific locations within a song.
Recording in and out of a song segment without stopping playback.
Editing recorded tracks using copy, cut, paste, and other functions.
How to reverse recent operations, including recording and editing.
The final stage of creating a mixed stereo track from recorded songs.
Navigating and jumping to specific points within songs.
Setting marks for punch recording, editing, and repeat playback.
Understanding and adjusting the DP-01's signal level meters.
Adjusting the frequency for high and low equalization controls per track.
Techniques for recording in and out of a song segment without stopping.
Rehearsing punch recording operations before committing to recording.
Setting time before and after punch points for preparation and cueing.
Mixing recorded tracks to unused tracks to free up recording space.
Repeating playback or rehearsal between IN and OUT points.
Adjusting the pause time between repeat loops.
Setting the tempo and time signature for musical timing.
Mapping bar and beat divisions to time for musical navigation.
Editing location points using bars/beats and time values.
Using the DP-01's MIDI metronome for timing.
Synchronizing external MIDI devices using tempo and song position.
Sending timecode for synchronization with timebase devices like DAWs.
Choosing which partition on the hard disk is active for songs.
Initializing the hard disk and setting partition sizes.
Reformatting a specific partition without changing sizes.
Transferring songs between different partitions on the DP-01.
Removing wasted space within a loaded song.
Preventing a song from being edited or erased.
Connecting the DP-01 to a PC for data transfer via USB.
Managing access to the DP-01's FAT partition via PC.
Archiving songs to a PC and restoring them to the DP-01.
Transferring WAV files from a PC to DP-01 tracks.
Saving DP-01 tracks as WAV files to a PC.
Saving the final stereo mix from the DP-01 to a PC.
Overview of easy, non-destructive editing capabilities on the DP-01.
Entering the track editing mode and selecting functions.
Details of various track editing functions like copy, paste, move, etc.
How to reverse recent operations, including recording and editing.
How to reapply an action that was previously undone.
General troubleshooting for common operational problems with the DP-01.
Explanations for popup messages encountered during DP-01 operation.
Troubleshooting issues related to hearing sound during playback.
Diagnosing and resolving difficulties when attempting to record.
Technical details of the DP-01's analog input and output connections.
Performance metrics like frequency response and distortion.
Dimensions, weight, and power requirements of the DP-01.
Using balanced XLR inputs for condenser microphones with phantom power.
Using the built-in tuner to tune guitars and basses connected to Input A.
Using the noise gate feature to reduce background noise.
Overview of the DP-01FX's input effects processor.
Selecting which input (A or B) the multi-effect applies to.
Choosing from various effect types like guitar, vocals, drums.
Using the built-in reverb effect as an alternative to external processors.
Selecting different reverb flavors like Hall, Room, Live, Studio.
Adjusting the decay time of the reverb effect.
Quick reference guide for performing common operations on the DP-01.
To Next Page
