Managing your songs
18 TASCAM DP-01 Owner’s Manual
Starting out with your DP-01
Reverting to last version The REVERT action (which follows the SAVE
action in the SONG menu) allows you to undo all changes since the last save.
… When you select the REVERT action, the title of the song is shown. Press
ENTER to go back to the last saved version, or EXIT to keep the current
song as it is.
Loading a saved song
Of course, saving songs is no use unless you can load them again. This is how
you do it.
1 Press the MENU key, use the wheel to highlight the SONG menu item,
and press the y key.
2 Highlight the LOAD action, and press the y key:
3 Use the wheel to move the / cursor to the song to be loaded (the ←
symbol means that the song is currently loaded) and press
ENTER.
The current song is saved, and the selected song is loaded.
Erasing a song
Only erase a song
if you are certain
you don’t need it any more (you
can’t undo this operation!). How-
ever, you can use a USB connec-
tion to back up songs to a PC
before you erase them.
If your disk is getting full, or you really don’t need a song any more, you can
erase it.
1 From the SONG menu, select the ERASE action:
2 Highlight a song and press ENTER.
3 You are asked if you want to erase the song (Are you sure?).
Press
ENTER to erase the song, or EXIT to cancel the operation.
If you erase the current song, the first song in the list is automatically
loaded.
== SONG MENU ==
SAVE :
REVERT :
LOAD .'
-- SONG LOAD --
/ MyBlues 118M
GoHome ← 224M
-- SONG ERASE --
/ MyBlues 118M
GoHome ← 224M
To Next Page
Loading...
Need help?
General
