Tascam MD-CD1 - Checking Remaining MD Time

9 – MD recording from an external source—Checking remaining
40
TASCAM MD-CD1 Owner’s Manual
Checking remaining MD time
During MD recording or recording standby mode,
press the TIME key on either the front panel or the
remote control, and the elapsed track recorded time
and remaining recording time will be shown in suc-
cession on the display.
Elapsed track recorded time (no indication light)
Disc remaining time (REMAIN only, or TOTAL and
REMAIN will light up)
Even if the power is turned off, the time settings will
be retained.
2ReMD-CD1.fm 40 ページ ２００４年１１月５日 金曜日 午前７時３５分