TEAC CORPORATION
Phone: +81-422-52-5082 www.tascam.com
3-7-3, Nakacho, Musashino-shi, Tokyo 180-8550, Japan
TEAC AMERICA, INC.
Phone: +1-323-726-0303 www.tascam.com
7733 Telegraph Road, Montebello, California 90640
3 – Preferences
The Preferences panel allows the setting of various
parameters:
MIDI Time Code
Firstly, MIDI Time Code can be accepted for use
with the Transport Window, and the default for this
over the USB connection is Port 3 (see the MIDI sec-
tion of the Owner’s Manual for details of the virtual
ports used by the TASCAM DM).
Enable
MTC In
and select the MIDI port.
Window settings
The last window size and position can be remem-
bered, using
Save Window Size and Position
.
Display splash image
allows you to choose whether a
“splash screen” announces the launching of the
TMCompanion application or not.
Confirmations
By default, the TMCompanion software asks for con-
firmation before transferring project data between
the host computer and the TASCAM DM (during
transfer a progress bar appears). Turn this confirma-
tion off with the
Skip Confirmation for Backup and Restore
option.
You can also turn off the notice confirming quitting
the application with the
No Confirmation on Quit
option.
Settings
The mixer’s internal clock and calendar may be set
from the host computer’s internal clock using the
Set
Mixer Clock
button.
Figure 9: Preferences screen
Printed in China
To Previous Page
Loading...
Need help?
General
