EasyManuals Logo

Task Force Tips EDUCTOR 125 Series Instructions For Installation, Operation And Maintenance

Task Force Tips EDUCTOR 125 Series
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
©Copyright Task Force Tips LLC 2010-2021 1 LIU-330 February 15, 2021 Rev09
TASK FORCE TIPS LLC
MADE IN USA · tft.com
3701 Innovation Way, Valparaiso, IN 46383-9327 USA
800-348-2686 · 219-462-6161 · Fax 219-464-7155
G-Force
INSTRUCTION FOR INSTALLATION, OPERATION, AND MAINTENANCE
EDUCTOR
125 SERIES IN-LINE
DANGER
Understand manual before use. Operation of this device without understanding the manual and
receiving proper training is a misuse of this equipment. Obtain safety information at tft.com/
serial-number.
This equipment is intended for use by trained and qualified emergency services personnel for
firefighting. All personnel using this equipment shall have completed a course of education
approved by the Authority Having Jurisdiction (AHJ).
This instruction manual is intended to familiarize firefighters and maintenance personnel with the
operation, servicing, and safety procedures associated with this product. This manual should be
kept available to all operating and maintenance personnel.
Inlet Pressure:
200 psi (13.8 bar)
160 psi (11 bar)
145 psi (10 bar)
Maximum
Back Pressure:
130 psi (9 bar)
100 psi (6.9 bar)
95 psi (6.5 bar)
Concentration Settings:
OFF, 1/4%, 1/2%, 1%, 3%, 6%
Models:
60 gpm (225 L/min)
95 gpm (263 L/min)
120 gpm (450 L/min)
125 gpm (475 L/min)

Other manuals for Task Force Tips EDUCTOR 125 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Task Force Tips EDUCTOR 125 Series and is the answer not in the manual?

Task Force Tips EDUCTOR 125 Series Specifications

General IconGeneral
BrandTask Force Tips
ModelEDUCTOR 125 Series
CategoryFirefighting Equipment
LanguageEnglish