©Copyright Task Force Tips LLC 2010-2021 11 LIU-330 February 15, 2021 Rev09
Table 7.1C
UE-125 EDUCTOR
125 GPM (475 L/min)
200 PSI (13.8 bar) Inlet Pressure
TFT
Nozzle Name
Nozzle Model # Water Flow
Setting
Nozzle
Pressure
Low Expansion
Foam Attachment
Multi-Expansion
Foam Attachment
Ultimatic
B-** 10-125 gpm
(40-475 L/min)
100 psi
(7 bar)
FJ-U
FJ-LX-U FJ-UMX
Metro 1 ME1* 125 gpm
(475 L/min)
100, 75, or
50 psi
(7, 5, or 3
bar)
FJ-HM
FJ-LX-HM
FJ-MX-HM
Quadrafog FQ125**, FQS125** 30-60-95-125 gpm
(110-230-360-470 L/min)
100 or 75 psi
(7 or 5 bar)
FJ-LX-FQ FJ-MX-FQ
QuadraCup FQ125BC, FQ125BC**,
FQCS**
30-60-95-125 gpm
(110-230-360-470 L/min)
100 or 75 psi
(7 or 5 bar)
BUILT-IN BUILT-IN
1.5”
G-Force
Selectable Flow
Fixed Pressure
30-60-95-125-150 gpm
(110-230-360-470-570 L/min)
100 or 75 psi
(7 or 5 bar)
FJ-LX-G FJ-MX-G
1.5”
G-Force
Automatic Pressure
with Variable Flow
60-150 gpm
230-570 L/min
100 or 75 psi
(7 or 5 bar)
FJ-LX-G FJ-MX-G
Thunderfog FT200*, FTS200*, FTS* 30-60-95-125-150-200 gpm
(110-230-360-470-570-750
L/min)
100 or 75 psi
(7 or 5 bar)
NONE FJ-MX-FT
Thunderfog FT250*, FTS250*,
FTS**,
JT**, JTS**
95-125-150-200-250 gpm
(360-470-570-680-950 L/min)
100 or 75 psi
(7 or 5 bar)
NONE FJ-MX-FT
Metro 2 ME2* 125 gpm
(475 L/min)
75 psi
(5 bar)
FJ-H FJ-HMX
Mid-Matic HM-**, HML-* 70-200 gpm
(260-760 L/min)
100 or 75 psi
(7 or 5 bar) FJ-LX-HM FJ-MX-HM
HMK-* 70-180 gpm
(260-680 L/min)
55 psi
(4 bar)
Mid-Force HMD-** 70-200 gpm
(270-760 L/min)
100 or 75 psi
(7 or 5 bar)
FJ-HM
FJ-LX-HM
FJ-MX-HM
Handline H-** 95-300 gpm
(360-1160 L/min)
100 psi
(7 bar)
FJ-H FJ-HMX
HL-** 95-250 gpm
(360-950 L/min)
75 psi
(5 bar)
HK-** 95-225 gpm
(360-850 L/min)
55 psi
(4 bar)
Dual-Force HD-** 95-300 gpm
(360-1150 l/min)
100 psi
(7 bar) FJ-H FJ-HMX
HDL-** 95-250 gpm
(360-950 L/min)
75 psi
(5 bar)
To Next Page
Loading...
Need help?
General