117
TASKI machines are high-quality machines that have been inspected
for safety at the factory by authorized inspectors. Electrical and me-
chanical parts are subject to wear and aging after a longer period of
use.
Please always indicate the type and number of the machine whenev-
er you contact us to place an order or in case of malfunctions.
You can find this information on the nameplate of your machine. The
address of your closest TASKI service partner is provided on the last
page of these instructions of use.
Legend:
◊ = after every cleaning, ◊◊ = every week,
◊◊◊ = every month, ⊗ = service light
◊
◊◊
◊◊◊
⊗
Charge batteries ● 109
Replenishing distilled water (wet-cell
batteries). Observe the service sheet of
the battery supplier!
● 110
Draining and cleaning the recovery and
fresh water tanks
● 115
Clean all parts marked in yellow ●
Clean the brushes ● 116
Clean the suction nozzle, check the
blades for wear and change them if
necessary
● 115
Wipe the machine using a damp cloth ● 116
Clean the gasket of the tank cover,
check for cracks and replace it if neces-
sary
●
Check HEPA filter and replace it if nec-
essaey.
●
Maintenance and service program car-
ried out by Diversey service techni-
cians
●
• In order to maintain operational safe-
ty and readiness for use, the ma-
chine must be serviced whenever the
maintenance indicator lights up (fac-
tory setting is 550 working hours) or
at least once a year.
• Unscrew the star knobs (1), pull the blade body (2) out of
the suction nozzle body and remove the blades (3).
• Now you can turn the blades or replace them.
• Put the blade body (2) back in the suction nozzle body and
screw the star knobs (1) back on.
1 4133961 Squeegee 720 mm
2 4134004 Squeegee 820 mm
3 4134207 Squeegee 920 mm
4133980 Blad 56/3x764 front standard x
4133981 Blade 56/4x820 rear standard x
4134767 Blade 56/3x764 front standard x
4134770 Blade 56/3x764 front standard x
4134749 Blade 56/4x820 rear standard x
4134201 Blade 56/3x875 front standard x
4134202 Blade 56/4x930 rear standard x
4134768 Blade 56/3x875 front standard x
4134771 Blade 56/3x875 front standard x
4134750 Blade 56/4x930 rear standard x
4134378 Blade 56/3x980 front standard x
4134379 Blade 56/4x1040 rear standard x
4134769 Blade 56/3x980 front standard x
4134772 Blade 56/3x980 front standard x
4134751 Blade 56/4x1040 rear standard x
To Next Page
Loading...
Need help?
General