116
-
Water ingress in the machine may cause considerable
damage to the mechanical or electrical parts.
-
Thus, the tank can dry, and the generation of mold and
unpleasant odors is prevented.
Otherwise, the batteries will be damaged beyond repair.
The maintenance of the machine is a prerequisite for impeccable op-
eration and a long service life.
The heavy weight of the machine, can cause injuries by
lifting.
-
- the machine must be switched off,
- the key can be removed.
• Put the filter back and twist it closed.
• The machine must be switched off.
• Rotate the tool counterclockwise
away from the tool connection using
your foot.
• Push the tool ejector briefly but firmly
with your foot.
• Manually remove the orbital pad from
the pad holder.
• Remove the brushes and clean them under running water.
• Wipe the machine with a moist cloth.
• Open the tank cover, carefully push
om the tank cover release [1] and
lower the tank cover [2] until it rests
on the tank.
To Next Page
Loading...
Need help?
General